金属表面移印油墨

金属表面移印油墨

1、适用范围：五金、金属、玻璃、陶瓷、电镀、大理石等材料丝印移印
2、特性：耐冲压、耐折弯、免烘烤自干、耐酒精、耐酸碱、耐汽油、耐腐蚀。
3、技术参数：
a.粘度：8000-12000CPS；
b.细度：5UM↓、光泽：60°↑；
c.干燥条件：自干24小时；
d.铅笔硬度：2H↑；
e.耐酒精：99%乙醇500g力来回**过30次；
f.耐磨：500g力来回**过30次；
g.过网性能：77T-145T网纱；
4、稀释剂的选择：稀释剂：S-3；使用前添加10%-15%的DB-01固化剂效果更好。
5、注意事项：
a.不可与其它油墨混用；
b.使用S-3慢干稀释剂稀释；
c.加过固化剂的油墨必须在3小时内用完；
d.密封保存，远离火源。
6、应急处理措施：
备注：由于材料及使用中的变数，可能是结果会有变化，以上数据仅供参考，使用前请自行测试。
1, the scope of application: no halogen ink can be printed, ABS, PC, PS, acrylic, metal, electroplating, UV surface.
2, characteristics: medium and dry, ethanol, acid resistance.
3, technical parameters:
A. viscosity: 8000-12000CPS;
B.: 5UM:: gloss, fineness of 60 degrees up;
C. dry conditions: 24 hours from dry;
D. pencil hardness: 2H up;
E. resistance to alcohol: 99% ethanol 500g force back and forth more than 30 times;
F. wear: 500g force back and forth more than 30 times;
G. n e t performance: 77T-145T;
4, thinner choice: thinner: S-3; before using the 10%-15% to add DB-01 curing agent better effect.
5, matters needing attention:
A. and other printing ink;
B. using S-3 slow dry diluent dilution;
C. plus the curing agent of the ink must be used up within 3 hours;
D. sealed to save, away from the fire source.
6, emergency treatment measures:
A. such as dipped into the eye immediately clear water cleaning, serious medical treatment,
B. fire fighting measures: dry powder, foam fire extinguisher or sand.
] Note: due to the materials and the use of variables, possibly is the change, the above data are for reference only, before using please self testing.