低温自干玻璃油墨 供应低温自干玻璃油墨

低温自干玻璃油墨

欧莱斯MPN系列玻璃油墨可以在各种玻璃上有很强的附着力。包括钢化玻璃,普通玻璃,镀膜玻璃,热弯玻璃等都能附着。
 
MPN玻璃油墨特点：
1：印刷材料广。
在各种玻璃上有很强的附着力,包括钢化玻璃,普通玻璃,镀膜玻璃,热弯玻璃等。
 
2：3M胶纸拉不掉。
用美国3M胶带粘附在油墨图案上，连续拉10次，油墨没有拉掉。
 
3: 手指甲扣不掉。
用指甲去划印刷好的图案,油墨不会裂。
 
4：丝印不起泡。
大面积印刷时,油墨不起泡,良品率提高了1.5倍。
 
5: 油墨气味淡。
丝印车间闻不到刺鼻的气味,对员工的健康影响小。
 
6: 绿色环保。
本油墨符合出口欧盟,美国,日本的环保法规要求。
 
7: 厂家直销。
荣彩采用ISO质量管理体系，产品质量稳定.交货速度快。
 
 使用说明：
1：加入10%的固化剂充分搅拌后混合使用，加了固化剂的油墨应在6小时内用完，过后油墨会变得粘稠而不能使用。
2：网 板：250—350目聚脂丝网印版。
3：胶 刮：建议使用70-85度聚氨酯胶刮。
4：参考用量：250 目网板印刷约为30㎡/㎏。
5：选用溶剂：为了印刷性能优良使用前请加10-15%的稀释剂，或直接使用我司**稀释剂。
6: 7: 网板清洗：版的清洗请用718清洗溶剂。Low temperature self drying glass ink

The rice MPN series glass ink can have a strong adhesion on various glass. It includes toughened glass, ordinary glass, coated glass, hot bending glass and so on.

MPN glass ink features:
1: the printing material is wide.
It has strong adhesion on all kinds of glass, including tempered glass, ordinary glass, coated glass, hot bending glass, etc.

2:3M glue paper can't be pulled out.
With the United States 3M tape adhered to the ink pattern, continuous 10 times, no ink.

3: fingernails can't be buckled.
Print a good print with a nail, and the ink will not crack.

4: silk screen is not bubbling.
When printing in large area, the ink is not bubbling, and the rate of good product is increased by 1.5 times.

5: ink smells light.
The screen printing shop can not smell the pungent smell, and it has little influence on the health of the staff.

6: green and green.
This ink meets the requirements of the export EU, the United States, and Japan's environmental regulations.

7: factory direct sales.
ISO quality management system is adopted. The quality of the products is stable and the delivery speed is fast.

Instructions：
1: add 10% solidifying agent and mix fully after mixing. The ink with the curing agent should be used up in 6 hours, and then the ink will become thicker and not used.
2: Net: 250 - 350 mesh polyester screen plate.
3: rubber scraping: it is recommended to use 70-85 degrees of polyurethane scraping.
4: dosage: 250 mesh screen printing is about 30 kg / square meters.
5: choose solvent: Please add 10-15% diluent or direct use of our special diluent before using good printing performance.
6: 7: net plate cleaning: for the cleaning of the plate, please clean the solvent with 718.